Pompa zębata do miodu, dżemu, powideł

Bidirectional gear pump (positive displacement) with variable speed and integrated level switch. This pump has been specially designed for pumping honey.  It runs at sufficiently low speed with 180RPM. It can easily be cleaned and it is maintenance free.

The trolley/base and fittings are made entirely from stainless steel. The pump head itself consists of a food approved massive plastic housing with plastic gears.

Capacity: about 1000kg/hour at 50hz.

How the level switch works: The level switch can be used for two purposes, emptying and filling. When set on emptying, the detector will sense honey in e.g. a honey sump and activate the pump as soon as it senses the honey. The pump will then start pumping and stop when the detector is at it's low level (about 5cm difference). When set on filling, you place e.g. an empty drum you want to fill with honey. The next step is to mount the float switch at the top of the drum and then start the pump manually. Once the sensor senses the honey at the top of the tank, it will stop the pump automatically. The most common use is to empty a honey sump with honey, since this part has a limited capacity. At the other end you usually place a large tank and place a level alarm inside this one, so that once this tank is filled, it will give an alarm and you know that you have to stop the pump.

Technical data:

• Type : gear pump
• Capacity : appx. 700l/hour (1000kg/h)
• Power: 230V, 1500W
• Variable speed: 5-50Hz / 18-180 RPM
• Dimensions: 64 x 20 x 42cm
• Weight : 36kg
• Included : 2 x 2" hose fittings Type BS Swienty