Belt press for fruits and vegetables PT 1050
Producer: Stalmont
Belt press for fruits and vegetables
Previously crushed fruits are crushed between a polypropylene belt, which passes through special fruit
see full description
DESCRIPTION
Belt press for fruits and vegetables
Previously crushed fruits are crushed between a polypropylene belt, which passes through special fruit pressing rollers. After the first squeeze, the pressed material goes through a return shaft to the next (smaller) press roller and is pressed again. The belt is automatically tensioned by pneumatic actuators.
The material from which the juice is squeezed is scraped off the belt by the end scraper, thus being removed from the press. The squeezed juice passes through a sieve belt and goes to the juice collection tank from which it is pumped out. During this process, the belt is washed with a jet of water under pressure.
Capacity kg/h, l/h
Up to 1500 kg/h; 1200 l/h
Installation power
2 kW
Juice pump
YES
Juice tank sieve
YES
Belt width (mm)
750 mm
Dimensions L x W x H (mm)
2500x1500x1650
Automatic scraper lifting system
OPTION
Automatic scraper lifting system
OPTION
Advantages of the single belt press
- Made of stainless steel
- Smooth speed control and compression pressure control
- Low maintenance costs
- Easy to operate
- Automatic belt feed adjustment
- Completely enclosed stainless steel bearings
- Easy to clean
- High-pressure belt cleaning system
We recommend with this product
High-performance device for purifying juice from solid particles. Made of stainless steel 1.4301 / AISI 304.
Disc centrifuges are used to separate juice from solid particles that may be present
From this manufacturer
Belt press for fruits and vegetables
Previously crushed fruits are crushed between a polypropylene belt, which passes through special fruit pressing rollers. After the first squeeze, the
Capacity: 3000 kg/h
Belt speed: adjustable
Installation power: 7.5 kW
Washing nozzles: yes
Feeder belt width: 450mm
Side channel blower: option
Chopper power: 7 kW
Water pump
The pasteurizer is designed for thermal processing of fruit juices and purees - the previously squeezed juice is fed to a buffer tank, from where it is transported to a tubular exchanger where
Pulp heater. The tubular heat exchanger is a device built on the principle of a “pipe in a pipe” type heat exchanger. The heating medium (hot water) is prepared using a gas or fuel
Belt press for fruits and vegetables
Previously crushed fruits are crushed between a polypropylene belt, which passes through special fruit pressing rollers. After the first squeeze, the
Capacity: 2500 kg/h
Belt speed: adjustable
Installation power: 5.5 kW
Washing nozzles: yes
Feeder belt width: 400 mm
Side channel blower: option
Chopper power: 5 kW
Water pump
Capacity: 1500 kg/h
Belt speed: adjustable
Feeder belt width: 250mm
Side channel blower: optional
Dimensions LxWxH: 2950x700x2150
Installation power: 3.5 kW
Washing nozzles:
Belt press for fruits and vegetables
Previously crushed fruits are crushed between a polypropylene belt, which passes through special fruit pressing rollers. After the first squeeze, the
The boiling kettle is a device designed for thermal processing of food products such as jams, preserves, syrups, etc. The installed low-speed mechanical mixer allows the product to be mixed
The pasteurizer is designed for thermal processing of fruit juices and purees - the previously squeezed juice is fed to a buffer tank, from where it is transported to a tubular exchanger where
Capacity: 2000 kg/h
Belt speed: adjustable
Installation power: 4.5 kW
Washing nozzles: yes
Feeder belt width: 350mm
Side channel blower: option
Chopper power: 4 kW
Water pump
The pasteurizer is designed for thermal processing of fruit juices and purees - the previously squeezed juice is fed to a buffer tank, from where it is transported to a tubular exchanger where
